Home :: OSD / Telemetry :: DJI Innovations :: Video Cable for Phantom2 with Zenmuse (Flysight ~ Boscam ~ Foxtech)
Details to FREE USA Shipping. We specialize in FPV Drone parts. USA domestic orders over $99 can qualify for free ground shipping.
The special Free Shipping applies to orders delivered within the Continental USA, Alaska & Hawaii.
Some restrictions apply. Click HERE for more details.

Video Cable for Phantom2 with Zenmuse (Flysight ~ Boscam ~ Foxtech)

Video Cable for Phantom2 with Zenmuse (Flysight ~ Boscam ~ Foxtech)
This FPV cable is for Phantom 2 (and Phantom 1 with Upgrade Board P330CB-H3-2D) installations that have Zenmuse a H3-2D / H3-3D / H4-3D Gimbal with Hero3/3+, or H3-3D-1.1 Gimbal with Hero3/3+/4. It is used to connect a FPV video transmitter to it. The cable is compatible with our 5.8GHz Flysight video transmitter and can be used with most Boscam and Foxtech 5.8GHz video transmitters too. Our cable takes all the guesswork out of connecting the equipment. Best of all, the cable is a plug-in installation (no soldering required).

There are three connectors on the cable. The two black Molex plugs (2-Pin power & 5-Pin Video) go to the Flysight, Boscam, or Foxtech 5.8GHz video transmitter. The white 6-pin plug goes to the Phantom2's central circuit board (inside the plastic shell). Overall length is 11-inches (28cm).

IMPORTANT NOTICE: This cable is specifically designed for directly connecting the Phantom2 (with Zenmuse) to the Flysight 5.8GHz transmitter that we sell. It is also compatible with the 5.8GHz Boscam and Foxtech FPV transmitters that have a 2-Pin battery cable and 5-Pin video cable. This cable is NOT compatible with ANY other hardware configurations and using it with other video transmitters may cause damage that will void your equipment warranties.

Referring to the photo below, a summary of each connector is as follows:

5-PIN: Video Transmitter A/V plug.

2-PIN: Video Transmitter DC IN plug.

PHANTOM2: Phantom 2 CAM Port. Connect this white plug into the Phantom2's Central Circuit Board (6-Pin CAM jack). This cable provides video and power connections from the DJI model.

Installing the cable involves disassembly of the DJI Phantom 2 which requires familiarity with working on the model. Please see the information above for basic installation details (no other instructions are provided).

This cable does not provide audio from the GoPro camera. If your transmitter has a built-in microphone then it will continue to operate normally.

Ship Wt. 0.03 lbs
Our price: $9.99 Item In Stock!
Quantity Price
3-9 Items $9.79
10+ Items $9.49

Payment Logos Bitcoins accepted here