Home :: Cameras :: CCD Camera with 2.8mm Lens, 600-Line (NTSC)
Details to FREE USA Shipping. We specialize in FPV Drone parts. USA domestic orders over $99 can qualify for free ground shipping.
The special Free Shipping applies to orders delivered within the Continental USA, Alaska & Hawaii.
Some restrictions apply. Click HERE for more details.

CCD Camera with 2.8mm Lens, 600-Line (NTSC)

CCD Camera with 2.8mm Lens, 600-Line (NTSC)

The PZ0420H NTSC Color CCD Camera is rated at 600 TVL resolution. It uses the popular SONY 1/3" CCD sensor and Nextchip image processor. It is housed in a lightweight plastic case and operates on 12VDC (3S LiPO compatible). This budget priced FPV camera provides outstanding performance and is a fantastic value.

The factory default camera settings are designed for common lighting conditions. But an On-Screen Display (OSD) menu allows serious FPV enthusiasts to customize the camera's performance. A removable OSD Menu Joystick provides access to the important video parameters; Advanced FPV enthusiasts can customize the BLC (back light), HLC (high light / eclipse), AGC (automatic gain), white balance, and more. Or simply use the factory default settings, it's up to you.

Example Parameter Settings for FPV (pdf file): Click Me!

The OSD also allows you to create a custom text message and place it nearly anywhere on the video screen. The text feature is perfect for station ID, ham call signs, camera location, or whenever you need to annotate the video image.


  • 1/3" Sony ICX638BKA Super HAD II color CCD sensor.
  • Nextchip 2040 DSP image processor.
  • Industry standard composite video output (NTSC).
  • 600 TV-line resolution.
  • Effective Pixels 768H x 494V.
  • Minimum Illumination 0.01 Lux.
  • Includes 2.8mm polished glass lens.
  • OSD menu for setting camera parameters.
  • White Dot Repair (DPC) function.
  • BNC equipped Video/Power cable, 20" long.
  • FPV Style Video/Power cable, 10" long with 3-pin connector.
  • 2.1mm x 5.5mm DC Power Jack.
  • 0.7 ounce (19 grams) without bracket or cable.
  • Size 1.45 (H) x 1.45 (W) Inch [37 x 37mm].
  • 9V - 13VDC / 70mA operation,
  • Made in China.

Camera Accessories

Your purchase includes (item 1) PZ0420H NTSC camera, (item 2) mounting bracket with screws, (item 3) OSD Menu Joystick Cable, (item 4) BNC Video/Power Cable, (item 5) FPV Video/Power Cable, (6) IR Block Filter with adhesive tape.


DC Input Polarity Wiring Information: The FPV cable has three wires, Red=12V, Black=Ground, Yellow=Video. The BNC cable's DC Power input is center positive. Reversing or exceeding the rated voltage will damage the camera and void the warranty. If the provided A/V cables are replaced with a custom cable, then proper wiring order must be observed. Otherwise permanent damage may result and the warranty will be void.



DiY IR Block Filter Included: To ensure best low light performance the CCD sensor does not have a IR blocking filter. However, an IR Filter is included in case you prefer more accurate daytime colors the filter may provide. The IR Block filter is installed using the included adhesive tape. Please perform the installation in a clean dust free environment. It is a delicate installation and requires experience with camera disassembly. Due to the possibility of camera damage during installation we do not accept camera returns if the IR Block filter has been used.
IR Block Filter

The camera includes a high quality polished glass 2.8mm lens. It is a popular wide angle lens for FPV applications. We sell other lenses for this camera too. For details just Click Me!


Example Parameter Settings for FPV (pdf file): Click Me!
SKU #PZ0420H-28IN
Ship Wt. 0.35 lbs
Our price: $29.99 Item In Stock!
Close-up view.
Here is what you get.
Rear View of  Camera
OSD Menu Joystick
IR Filter included for DiY installation.

Payment Logos Bitcoins accepted here