Home :: Batteries & Power :: Adjustable Voltage Regulator, 1-35V Step Down
Close
Details to FREE USA Shipping. We specialize in FPV Drone parts. USA domestic orders over $99 can qualify for free ground shipping.
The special Free Shipping applies to orders delivered within the Continental USA, Alaska & Hawaii.
Some restrictions apply. Click HERE for more details.

Adjustable Voltage Regulator, 1-35V Step Down

Adjustable Voltage Regulator, 1-35V Step Down

This Voltage Regulator has an adjustable 1.2VDC to 30VDC output. It is a step-down type, so it is used to reduce the input voltage. It uses DC-DC switching technology so it operates substantially cooler than common linear regulators.

The circuit board has four pads (soldering required) that are labeled as follows:

IN+ : Battery/Power In +
IN- : Battery Ground
OUT+: Regulated Voltage
OUT-: Common Ground



The screw head type voltage adjustment is shown in the photo on the right. A voltmeter is required to adjust the voltage. Do NOT connect anything to the regulator's output pads until after you have verified the output voltage is correctly set to the required value. After everything is connected a final re-adjustment may be necessary.

Specifications:
Input Voltage: 7-35VDC
Output Voltage: 1.2VDC-30VDC
Output Current: 2A / 10W maximum
Switching Frequency: 150KHz nominal
Power Efficiency: 83% typical
Output Ripple: 60mV at 10W loads typical
Technology: Switch-Mode Buck Regulator
Voltage Adjust: Screwdriver Access
Size: 1.95 x 0.9 x 0.5 inch (50x22x12mm)
Weight: 11 grams

 

Details
SKU #VREG-ASD3
Ship Wt. 0.08 lbs
 
Our price: $7.99 Item In Stock!
Quantity Price
3-9 Items $7.79
10+ Items $7.49
*Note:
Options
Quantity
Voltage Adjustment Location Shown Here
Power Supply Filter, L-C Type Low Pass Antenna Filter for 1.2GHz - 1.3GHz TX Power Cord, Dual 2.1mm Barrel Plugs to XT60 Male
$11.95
$29.99
$6.49
 
Notch type Antenna Filter for 1.2GHz - 1.3GHz TX Four-Headed Power Cord (2.1mm Barrel Type) Toroid Ferrite Core EMI/RFI Suppressor, 18mm
$9.99
$3.99
$0.95
 
Toroid Ferrite Core EMI/RFI Suppressor, 10mm Toroid Ferrite Core EMI/RFI Suppressor, 20mm Toroid Ferrite Core EMI/RFI Suppressor, 13mm
$0.89
$1.39
$0.79

Payment Logos Bitcoins accepted here