Home :: Batteries & Power :: Adjustable Voltage Regulator, 1-35V SEPIC Type
Details to FREE USA Shipping. We specialize in FPV Drone parts. USA domestic orders over $99 can qualify for free ground shipping.
The special Free Shipping applies to orders delivered within the Continental USA, Alaska & Hawaii.
Some restrictions apply. Click HERE for more details.

Adjustable Voltage Regulator, 1-35V SEPIC Type

Adjustable Voltage Regulator, 1-35V SEPIC Type

This Voltage Regulator has an adjustable 1.2VDC to 30VDC output. Due to its unique design, the output voltage can be set higher or lower than the input's voltage source. It uses DC-DC switching technology so it operates substantially cooler than common linear regulators.

The circuit board has four pads (soldering required) that are labeled as follows:

IN+ : Battery/Power In +
IN- : Battery Ground
OUT+: Regulated Voltage
OUT-: Common Ground

Note: Circuit board color may vary (red is shown in the photo for example only).

The screw head type voltage adjustment is shown in the photo on the right. A voltmeter is required to adjust the voltage. Do NOT connect anything to the regulator's output pads until after you have verified the output voltage is correctly set to the required value. After everything is connected a final re-adjustment may be necessary.

Input: 3-35VDC
Output: 1.2VDC-30VDC 2A / 10W maximum
Switching Frequency: 60KHz typical
Output Ripple: 150mV at 10W loads typical
Technology: Switch-Mode SEPIC Regulator
Voltage Adjust: Screwdriver Access
Size: 1.9 x 0.9 x 0.5 inch (49x22x12mm)
Weight: 15 grams

Our PSF-001 LC filter (available separately) is a popular accessory choice for this regulator.


Ship Wt. 0.08 lbs
Our price: $7.99
Quantity Price
3-9 Items $7.79
10+ Items $7.59
Quantity Out of stock
Voltage Adjustment Location Shown Here

Payment Logos Bitcoins accepted here