Home :: Video Tx / Rx (RF) :: 5.8GHz Wireless A/V Systems (ImmersionRC / FatShark) :: 5.8GHz Race Band 15-Channel A/V Transmitter, 200mW (ImmersionRC)
Close
Details to FREE USA Shipping. We specialize in FPV Drone parts. USA domestic orders over $99 can qualify for free ground shipping.
The special Free Shipping applies to orders delivered within the Continental USA, Alaska & Hawaii.
Some restrictions apply. Click HERE for more details.

5.8GHz Race Band 15-Channel A/V Transmitter, 200mW (ImmersionRC)

5.8GHz Race Band 15-Channel A/V Transmitter, 200mW (ImmersionRC)
AccessoriesThe ImmersionRC 5.8GHz 200mW RaceBand A/V Transmitter is a great small field performer. This 15-channel model has the popular FPV Race Band frequencies. It has convenient features such as a wide operating voltage range and regulated 5VDC output to power low voltage cameras or other video accessories.

Your purchase includes a JST/BEC type battery cable, 5.8GHz dipole antenna, and A/V pigtail cable. Please see the photo on the right  for additional details.


This transmitter is 100% compatible with 5.8GHz A/V receivers offered by ImmersionRC and FatShark. It is NOT recommended for use with competitor branded 5.8GHz video systems.


 

Features and Specifications:

  • Frequency: 5.8GHz RF band.
  • RF Power: 200mW, +23dBm.
  • RF Port: 50 ohms.
  • Channels: 15 (See list below).
  • Video Input: Composite NTSC / PAL, 75 ohms.
  • Audio Mode: Stereo (left / right channels).
  • Audio Sub-carrier: 6.0 / 6.5 MHz
  • Audio Input: 1V Line Level, >10K ohms.
  • Antenna Connector: SMA type.
  • Operating Voltage: 7 - 25 VDC (compatible with 2S-6S LiPO batteries)
  • Typical current: 8V@420mA / 12V@290mA
  • Accessory Voltage: 5.0VDC output / 300mA maximum.
  • Weight: 25 grams (with antenna).
  • Size: 50 x 23 x 11mm.

 

Wiring Information (reference ID label on transmitter):

GND: Common ground
BATT: DC Power In
AUDR: Audio Input, Right Channel
AUDL: Audio Input, Left Channel
VID: Video Input
GND: ground (for 5V Out)
5V OUT: Regulated 5.0VDC Output (optional camera power)



Important:

This transmitter is 100% frequency & modulation compatible with our ImmersionRC and FatShark products.

NEVER operate the transmitter without a properly installed antenna. Otherwise the transmitter may be damaged and the warranty will be void.

This is a high powered transmitter. It will require sufficient air-flow during use to prevent overheating. If it becomes too hot during use then remove power and allow it to cool. Do NOT operate without sufficient airflow.



The operating distance will depend on the environment, installation, and other factors. FPV (mobile) applications will perform best with circular polarized antenna systems rather than the provided dipoles. For example, upgrading to a SpiroNet antenna on the transmitter and a +5dBi Circular Polarized Patch antenna on the receiver can provide up to 1000 meters range in wide open line-of-sight environments. Obstructions and interference sources will severely reduce its range.

 

Notice: This is a ham radio hobby type product. Using the TX-5G8-200RB in the USA and most other countries will require an Amateur Radio license. Some countries may forbid its use. It is your responsibility to ensure that its use meets the requirements imposed by your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.


Frequency List:

ImmersionRC/Fatshark Channels
CH1= 5740 MHz

CH2= 5760 MHz

CH3= 5780 MHz
CH4= 5800 MHz
CH5= 5820 MHz
CH6= 5840 MHz

CH7= 5860 MHz

Race Band Channels
CH1= 5658 MHz

CH2= 5695 MHz

CH3= 5732 MHz
CH4= 5769 MHz
CH5= 5806 MHz
CH6= 5843 MHz

CH7= 5880 MHz
CH8= 5917 MHz

 

ImmersionRC Web Site: Click Me!

Details
SKU #TX-5G8-200RB
Ship Wt. 0.22 lbs
 
Our price: $38.99 Item In Stock!
Quantity Price
3-9 Items $38.50
10+ Items $38.25
*Note:
Options
Quantity
Close Up View.
Accessories included.
Frequency List

Payment Logos Bitcoins accepted here