Home :: Video Tx / Rx (RF) :: 5.8GHz Wireless A/V Systems (ImmersionRC / FatShark) :: 5.8GHz 7-Channel Cased A/V Transmitter, FCC Compliant (FatShark)
Close
Details to FREE USA Shipping. We specialize in FPV Drone parts. USA domestic orders over $99 can qualify for free ground shipping.
The special Free Shipping applies to orders delivered within the Continental USA, Alaska & Hawaii.
Some restrictions apply. Click HERE for more details.

5.8GHz 7-Channel Cased A/V Transmitter, FCC Compliant (FatShark)

5.8GHz 7-Channel Cased A/V Transmitter, FCC Compliant (FatShark)

The FatShark 5.8GHz cased A/V transmitter is FCC Part 15 approved for license free operation. It does NOT require a amateur radio license to use it in the USA! It is designed for short range wireless video applications such as multirotor or KAP camera operators. 

Your purchase includes a 2S-4S compatible power filter with cable, Fatshark camera compatible cable, and built-in Spironet circular polarized omni antenna.


This transmitter is compatible with 5.8GHz A/V receivers or goggles offered by ImmersionRC and FatShark. It is also compatible with our 7-Channel Black Pearl Diversity monitor and 7-Channel Flysight receiver. It is NOT compatible with 32-channel 5.8GHz video systems except those offered by ImmersionRC. The provided power filter is compatible with a 2S-4S LiPO battery that has a JST-XH type charge port connector. The provided camera cable is compatible with Fatshark's 5 Volt CCD and CMOS cameras.


Features and Specifications:

  • Frequency: 5.8GHz RF band.
  • Channels: Seven (5740, 5760, 5780, 5800, 5820, 5840, 5860 MHz).
  • RF Field Strength: Approximately 90dBuV/m @ 3m (<1mW RF Power).
  • Operating Distance: 100 meters in ideal line-of-sight environments.
  • Video Input: Composite NTSC / PAL, 75 ohms.
  • Audio Sub-carrier: 6.0 / 6.5 MHz.
  • Audio Input: 1V Line Level, >10K ohms.
  • Antenna: Circular Polarized Omni, not detachable.
  • Antenna Connector: None.
  • Operating Voltage: 6 - 17 VDC.
  • 5VDC Accessory Power Output (250mA Maximum).
  • Typical current: 8V@80mA / 12V@60mA (transmitter only).
  • External Power Filter: 2S, 3S, and 4S LiPO battery compatible.
  • Weight: 1 ounce (27 grams) with antenna, cables, and filter.
  • Case Size: 1.5 x 1.0 x 0.6 inches (38 x 25 x 15 mm).
  • Overall Length: 3.3 inches (includes antenna).
  • FCC ID: 2ABYQFSV2461.
  • Made in China by FatShark RC Vision Systems.

 

Audio inputs are available on the front panel's 5-Pin connector. This connector also has 5V power and video connections. It's ideal for custom A/V applications. This optional connector feature requires a 5-pin plug cable (sold separately).

5-Pin connector wiring Information (see photo below):

VDC: 5VDC Output (camera power)
GND: Common ground
VID: Video Input
AUDR: Audio Input, Right Channel
AUDL: Audio Input, Left Channel


Important:

This transmitter is 100% compatible with 5.8GHz A/V receivers offered by ImmersionRC and FatShark. It is also compatible with our 7-channel Black Pearl Diversity Monitor and 7-channel Flysight receiver. It is NOT recommended for use with competitor branded 5.8GHz video systems.

Maximum allowed voltage is 17VDC. Exceeding the voltage or reversing the polarity will cause damage and void the warranty.



A usable range of approximately 200 meters is achieved by pairing the transmitter (equipped with integrated circular polarized antenna) with a similarly equipped Fat Shark headset or ImmersionRC receiver (which have superior RF sensitivity). A right hand circular polarized antenna, such as the Spironet Omni or Spironet Patch, is required on the receive side. Operating distance is affected by the environment, receiver's antenna, and other factors. Obstructions and interference sources will reduce range.

Notice: This is a FCC Part 15 compliant RF device. A ham radio license is NOT required to use it in the USA. However, its low RF power limits this transmitter to short range line-of-sight applications.


Frequency Summary List:

CH1= 5.740 GHz
CH2= 5.760 GHz

CH3= 5.780 GHz
CH4= 5.800 GHz
CH5= 5.820 GHz
CH6= 5.840 GHz

CH7= 5.860 GHz

 


FCC COMPLIANCE INFORMATION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.


Made in China.
FatShark RC Vision Systems Model 2461.

Instruction Manual / Data Sheet: Click Me!

33%
Details
SKU #TX-5G8-FCC1
Ship Wt. 0.28 lbs
 
List price: $44.99
Our price: $29.99 Item In Stock!
Options
Quantity
Close Up View
Freq Select Switches and 5-pin connector
Your purchase is for all these things.

Payment Logos Bitcoins accepted here