Home :: Antennas :: 5.8GHz Antennas :: 5.8GHz AirScrew FPV Race Spec Omni Antenna, RHCP
Details to FREE USA Shipping. We specialize in FPV Drone parts. USA domestic orders over $99 can qualify for free ground shipping.
The special Free Shipping applies to orders delivered within the Continental USA, Alaska & Hawaii.
Some restrictions apply. Click HERE for more details.

5.8GHz AirScrew FPV Race Spec Omni Antenna, RHCP

5.8GHz AirScrew FPV Race Spec Omni Antenna, RHCP

The AirScrew Race Spec antenna was designed with the FPV racer in mind. It combines small size, low weight, and good durability with top-notch performance for the ultimate competitive advantage. It has a special low profile coaxial BALUM choke to ensure the highest axial ratio and video clarity.

The AirScrew is right hand circularly polarized (RHCP) and offers higher performance than provided by common linear whip antennas. Circular polarized antennas will help reduce the multipath interference nuisances that affect many 5.8GHz operating environments.

Although it has exposed elements, a reinforced nylon hub at the feed-point helps it survive the hard action from racing. We're not saying you can drop a piano on them, but after common crashes you can often bend them back to shape and fly again.

This 5.8GHz antenna system is designed for use on the video transmitter. The receiving antenna (not included) should be RHCP (right hand circular polarized) for best performance.

The coax cable is terminated with a SMA plug. A RP-SMA plug adapter is included (do NOT install the RP-SMA adapters on ImmersionRC or Fatshark equipment). A star-shaped plastic SMA tightening tool is supplied too.

Specifications and Features

  • Center Frequency: 5800MHz (5.8GHz)
  • Frequency Range: 5700MHz - 5900MHz
  • Gain: ~1.5 dBiC at 5800MHz
  • VSWR: <1.5 typical at 5800MHz
  • Polarization: RHCP
  • RF connector: SMA Plug
  • Plastic SMA Tool included
  • RP-SMA adapter included
  • Integrated coax extension
  • Overall Length: 2.1 inch (55mm)
  • Width: 1.3 inches (34mm)
  • Weight: 7g
  • Manufacture: Aerial Video Systems

Important: (1) Do not over-tighten the SMA connector or it may be damaged. Please use the supplied star-shaped tool and apply gentle torque for a snug fit. (2) Be sure to verify that the antenna is using the correct connector (SMA or RP-SMA adapter). Incorrectly matched connectors may cause transmitter failure! We are not responsible for damage due to using the incorrect connector.

SKU #AS-5800-RS
Ship Wt. 0.20 lbs
List price: $12.99
Our price: $9.75 Item In Stock!
Accessories included.

Payment Logos Bitcoins accepted here