Digital Products Company :: OSD / Telemetry :: Eagle Tree Systems :: Wireless Video Transmitter & OSD, FPV Package Deal


	Home


	Shopping Cart


	Contact Us

Printable version

Categories

Help

Digital Products Company :: OSD / Telemetry :: Eagle Tree Systems :: Wireless Video Transmitter & OSD, FPV Package Deal

Wireless Video Transmitter & OSD, FPV Package Deal

Ok, so you've decided that you need the EagleTree OSD Pro telemetry system and a quality made 900MHz video transmitter to go with it. But all the little bits and pieces seem confusing and you're not sure what to buy? Well, we've made designing your wireless OSD system a lot easier and best of all you save over $50!

This kit combines our 900MHz / 500mW video transmitter, a high quality color CCD camera, and the EagleTree OSD Pro on-screen telemetry display system. Plus, specially designed cables to connect it all together. The only thing you need to add is the video receiver and batteries. Don't worry, we'll help you pick those items too (please see the "What's not Included" section near the bottom of the page).

The photo below shows everything that is provided. Honestly, it doesn't get any easier to get up and running.

Item A: EagleTree eLogger V3 with 100 Amp sensor. Click Me!
Item B: USB cable for eLogger firmware updates.
Item C: Eagle Tree OSD Pro Video Expander module. Click Me!
Item D: GPS extension cable, supplied in kits shipped before May-31-2010.
Item E: eLogger GPS-V4 Expander module. Click Me!
Item F: Eagle Tree OSD Pro cable Kit.
Item G: eLogger Battery Harness cable. Click Me!
Item H: DPC-420A 420 line CCD color camera. Click Me!

{ or optional DPC-480A 480 line CCD color camera. Click Me! }

Item I: DPC-420A/480A camera interconnect cable. Click Me!
Item J: TX9-500 900MHz / 500mW transmitter. Click Me!
Item K: Dipole Antenna, +3dBi omni-directional.
Item L: Deluxe A/V cable for TX9-500 transmitter. Click Me!
Item M: Male-male video adapter cable, Click Me!.

This wireless OSD system will transmit graphic data and voice announcements that report a variety of alarms and data, including: voltage, current, mAH, Watts, Home Arrow, Return to Home (RTH / RTL), RADAR, altitude, course (travel direction), ground speed, longitude, latitude, and navigation waypoints. You can expand this system even further by using the low cost eLogger accessories, such as these: Click Me!

Here's a screen shot that shows some of the information that can be shown (temperature and RPM data requires optional accessories):

Screenshot showing a sample of the elogger data that can be displayed.

The data you wish to see can be customized using the companion PC configuration software (available for download at no charge). All the data parameters that are supported by the eLogger can be displayed on the video display. Here are some examples:

GPS derived distance-to-home, home-arrow, altitude, ground speed, course, and more.
Volts, Amps, mAH, Watts.
Radar travel view.
Amateur radio call sign.
Supports graphical and text layouts.
Many parameters can be setup as voice alerts.

The installed weight (without battery) is approximately 150 grams (5.5 ounces). The required remote control system is not included (compatible with popular hobby R/C systems sold by Futaba, JR, Spektrum, and others).

Notice: Due to the 900MHz transmitter's high RF power, using it in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements of your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.

All 900MHz wireless video transmitters that we ship to a USA address will have only one available RF channel (910MHZ). Transmitters shipped outside the USA will have four RF channels (910MHz, 980MHz, 1010MHz, and 1040MHZ). This restriction is imposed by the US government and we are unable to comply with requests to send the four channel version to USA destinations.

What's not included?

(1) Of course you will be able to hear the automated voice audio alerts from the OSD Pro's voice synthesizer. However, a microphone for listening to background sound is not provided. The optional microphone can be added at additional cost.

(2) The 12V battery pack is not included (10V-12.5V is allowed). Exceeding this voltage, or reversing the power connections, WILL cause permanent damage and void the warranty. We recommend a 3-cell (11.1V) lithium polymer LiPO pack with JST (BEC) connector, such as our #LB3CR-610. We have other battery choices so that you can select the best one for your application. More choices: Click Me.

(3) The 900MHz A/V receiver is not included, but we offer fully compatible models that work great with this special package. Please look here to purchase them: click here.

The video format is available in NTSC or PAL. If you are unsure which to choose then please consult this list: TV Video Standards.

The antenna is offered in two variations (your choice). The #ANTCOM-900 is a compact size dipole that is designed specifically for 910MHZ (CH1) operation, so it is a good choice for North American customers or when small antenna size is important. The #ANTHWD-900 is a full size dipole that can be used on all four RF channels, so it is ideal for the exported/non-USA transmitter or when longer range is needed.

Instruction Manual: Click Me!
Note: Please thoroughly read these special instructions BEFORE you begin the installation. It provides additional information not found in the manuals provided by EagleTree.

13%

Details


SKU	#OSDPRO-905
Ship Wt.	0.60 lbs
Price:	$399.95

Options



Video Format
Camera Type
Antenna Choice
Microphone
Quantity
If you see this message, your web browser doesn't support JavaScript or JavaScript is disabled. Please enable JavaScript in your browser settings so the online store can function correctly.

Detailed images