This 3-cell LiPO (Lithium Polymer) battery is rated at 11.1VDC and has 1300mAH of capacity. Includes 4-pin balancer-charger plug and Ultra-T connector (
Deans compatible
).
This battery can be used to power many of the popular A/V receivers that are designed to operate on 12VDC.
Specifications:
● Voltage: 11.1 VDC (nominal)
● Capacity: 1300mAH
● Construction: 3-cells in series (3S)
● Charge Cable: 4-pin charge-balance connector
● Power Cable: 5-inch silicon wires
● Connector
: Ultra-T
● Discharge Rate: 20C (maximum)
● Charge Rate: 1C (recommended)
● Weight: 115 grams
● Size: 2.7 x 1.4 x 0.9 inches (68 x 35 x 22 mm)
● Produced by Turnigy Power Systems
IMPORTANT: LiPO batteries require a properly rated balancer/charger for safe use. Never charge while unattended. Do not discharge below 3V per cell or charge higher than 4.20V per cell. Always follow the manufacturer's instructions.
DO NOT use this battery until you have downloaded and read the safety instructions. LiPO batteries require following strict safety procedures or they will cause injury and property damage. By purchasing this battery, the buyer/user assumes all risks. If you do not agree with these conditions then do not order this item or attempt to use any LiPO battery you have purchased.
