This fully assembled 2.4GHz A/V receiver is based on Airwave's popular AWM634RX RF module. It offers an easy way for RF developers to evaluate the Airwave module. Plus, it is a great for any hobbyist or engineer that does not have the time or experience to build their own Airwave compatible A/V receiver.
Because it uses the AWM634RX RF module, it receives high bandwidth composite video and stereo audio signals. Fully supports NTSC and PAL video formats. The rugged metal enclosure is very compact.
The three front panel mounted A/V connectors are standard RCA style.
The rear panel mounted antenna jack is a low loss SMA type connector. The DC input is a 2.1mm barrel type jack. A spare DC jack is provided for passing power to other video devices and accessories.
Your purchase will include the receiver and wall mounting bracket. No other accessories are provided (the antenna and cables are not included).
Features
Fully assembled and tested
High quality video with two audio channels
Worldwide 2.4GHz ISM band
Four RF Channels (2414, 2432, 2450, 2468 MHz)
FM Modulation
Power-On indicator
Operates on 9VDC-12VDC
Low current consumption (200mA typical)
2.1mm x 5.5mm power jack with pass-through feature
Rugged metal case, 4.1 x 2.4 x 1.1 inches.
Instructions for setting the RF channel using the rear panel DIP Switch:
|
FREQUENCY |
SW-1 |
SW-2 |
SW-3 |
SW-4 |
|
2.414GHz |
Down |
UP |
UP |
N/A |
|
2.432GHz |
UP |
Down |
UP |
N/A |
|
2.450GHz |
UP |
UP |
Down |
N/A |
|
2.468GHz |
UP |
UP |
UP |
N/A |
Note: This A/V receiver is compatible with Airwave 2.4Ghz transmitters. Not recommended for use with other A/V brands.
