This 900MHz wireless A/V (audio/video) receiver is compatible with our 900MHz A/V transmitters. This special model has the highly respected Comtech BSS479 baseband tuner module in it. The Comtech module is renown for its high quality construction and consistent RF performance.
The receiver requires a common 2.1mm barrel type DC power cord (available separately). We offer several different types and they can be found here: click here.
Your purchase includes a high quality RCA A/V cable. Length is approximately 55-inches (1.4 meters).
The antenna is not included (available at additional cost). The #ANTHWD-900 half-wave dipole is a popular antenna choice and can be purchased with the receiver as an option. We offer other 900Mhz antennas too: click here.
Features / Specifications
-
Comtech BSS479LAIDF tuner module.
-
Four (4) RF channels: 910MHz, 980MHz, 1010MHz, 1040MHz.
-
Phase Lock Loop (PLL) stability for drift-free operation.
-
Composite video, supports NTSC and PAL standards.
-
FM-FM modulation.
-
Convenient channel select slide switch.
-
-85dBm RF sensitivity (typical), 5.5MHz audio sub-carrier.
-
Low loss SMA antenna jack.
-
RCA jacks for A/V connections.
-
Power-On LED indicator.
-
Common 2.1mm power jack (barrel type, center positive).
-
12VDC operation, 300mA.
-
5.2 x 3.2 x 0.85 inches (130x81x22 mm).
-
6.5 ounces (180 grams).
-
Includes RCA A/V cables.
The power source is not included. It must be 12VDC (±10%). Exceeding this voltage, or reversing the power connections, WILL cause permanent damage and void the warranty. AC mains powered installations must use a voltage regulated supply (available separately) and should not use standard unregulated types. For portable use we recommend a high capacity 3-cell (3S / 11.1V) lithium polymer LiPO pack such as our #LB3CT-1800T with the #CORD-UB2 adapter.
Important note: The DC input connector is a 2.1mm barrel style connector that is center (+) positive. Reversed voltages will damage the receiver.
Instruction Manual: Click Me!
|