This Voltage Regulator accepts 6-26 VDC on its input and outputs 5VDC or 6VDC (jumper selectable). DC-DC switching technology helps it run cooler than traditional linear regulator designs.
It can be used as a radio control system BEC (battery eliminator circuit) or for other applications that need 5-6 VDC. For example, it can be used to power a 5V CCD video camera from a 2S to 6S (2-6 cell) LiPO battery pack.
The DC input has 3-inch leads (Red wire = BAT+). The 6-inch long output cable has a 2-wire (3-pin) servo style connector, wired as follows:
Red: +5VDC
Black: Ground
When used as a R/C receiver BEC, the 3-pin cable is plugged directly into the receiver's battery port.
Specifications:
Input: 6-26VDC
Output: 5VDC/6VDC (jumper select), 3A continuous, 5A peak
LED Power-On Indicator
Output Ripple: <50mV typical
Technology: Switch-Mode Regulator (BEC/UBEC)
Size: 2.0 x 0.7 x 0.3 inch (51x17x9mm)
Weight: 12 grams
Origin: Made in China by HobbyWing Techonology Co.
|