This step-down Voltage Regulator accepts 6-23 VDC on its input and outputs 5VDC at up to 5 amps. It can be used as a radio control system BEC (battery eliminator circuit) or for other applications that need 5VDC. For example, it can be used to power a 5V wireless video system from a 2S to 5S (2-5 cell) LiPO battery pack.
The DC input has 2-inch bare leads (Red wire = BAT+). The 5-inch long output cable has a 3-pin servo style connector, wired as follows:
White: Not installed (N/A)
Red: +5VDC Output
Black: Ground
When used as a R/C receiver BEC, the 3-pin servo plug is installed directly into the receiver's power-in port and the battery connects to the regulator's input ("IN" side).
Specifications:
Input: 6-23VDC
Output: 5VDC, 5A maximum
Technology: Switch-Mode Regulator
Size: 1.5 x 0.8 x 0.5 inch (38x21x13mm)
Weight: 9 grams
Origin: Made in China by AEO Tech
|