5.8GHz Audio/Video Transmitter, 600mW (ImmersionRC)

New for 2012: Smaller Size, wider operating voltage.

The ImmersionRC 5.8GHz 600mW A/V transmitter packs a powerful punch for its small size. It's ideal for FPV applications that involve small R/C models and robots. It has convenient features such as a wide operating voltage range and regulated 5VDC output to power low voltage cameras or other video accessories.

Your purchase includes a JST/BEC type battery cable, 5.8GHz dipole antenna, and A/V pigtail cable. Please see the photo on the right  for additional details.

This transmitter is compatible with 5.8GHz A/V receivers offered by ImmersionRC, Airwave, and FatShark. Here's a list of popular receivers that we offer:

AWRX-668 Airwave 5.8GHz receiver
Uno5800 ImmersionRC 5.8GHz receiver
AWRX698-RX Airwave 5.8GHz receiver with integrated patch antenna
Duo5800-v3 ImmersionRC 5.8GHz receiver with RF diversity.

Features and Specifications:

• Frequency: 5.8GHz RF band.
• RF Power: 600mW, +28dBm.
• RF Port: 50 ohms.
• Channels: Seven (5740, 5760, 5780, 5800, 5820, 5840, 5860 MHz).
• Video Input: Composite NTSC / PAL, 75 ohms.
• Audio Mode: Stereo (left / right channels).
• Audio Sub-carrier: 6.0 / 6.5 MHz
• Audio Input: 1V Line Level, >10K ohms.
• Antenna Connector: SMA type.
• Operating Voltage: 7 - 25 VDC (compatible with 3S LiPO batteries)
• Accessory Voltage: 5.0VDC output / 300mA maximum.
• Weight: 25 grams (with antenna).
• Size: 50 x 23 x 11mm.

Important:

► This transmitter is NOT compatible with the SkyRF 5.8GHz receivers. You must use the receivers mentioned above (not included).

► NEVER operate the transmitter without a properly installed antenna. Otherwise the transmitter may be damaged and the warranty will be void.

► This is a high powered transmitter. It will require sufficient air-flow during use to prevent overheating. If it becomes too hot during use then remove power and allow it to cool. Do NOT operate without sufficient airflow.

The operating range will depend on the environment, installation, and other factors. As a guideline, using a 5-8dBi Patch antenna on the receiver will provide more than 1000 meters in wide open line-of-sight environments. Obstructions and interference sources will severely reduce its range. FPV (mobile) applications will perform best with the Duo5800v2 receiver.

Frequency Summary List:

CH1= 5.740 GHz
CH2= 5.760 GHz
CH3= 5.780 GHz
CH4= 5.800 GHz
CH5= 5.820 GHz
CH6= 5.840 GHz
CH7= 5.860 GHz

Instruction Manual: Click Me!